Atosa ATTG-24-NG 24-Inch Thermostatic Gas Griddle, Natural Gas, 50,000 BTU, 1" Steel Plate
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa ATTG-24-NG is a 24" wide gas griddle with a 1" thick polished steel plate and thermostatic controls for each 12" section. It runs on natural gas with 50,000 BTU in total.
At a Glance
- Size: 24" W x 28-3/5" D x 15-1/5" H
- Work area: 23-9/10" x 19-9/10"
- Plate: 1" thick polished steel
- Gas: natural gas, 2 burners, 50,000 BTU total
- Controls: independent thermostatic control for each 12" section
- Certifications: cETLus, ETL-Sanitation
- Warranty: 1 year parts and labor (US only)
Most units ship within one business day from our warehouse with free freight and free lift gate to Seattle restaurants and the lower 48.
A 24" Thermostatic Commercial Gas Griddle
This commercial gas griddle is 24" wide with a 1" thick polished steel plate and a thermostatic control for each 12" section, so each side holds the temperature you set. It runs on natural gas with 50,000 BTU in total.
Is the ATTG-24-NG the Right Size and Gas for Your Kitchen?
The ATTG-24-NG is 24" wide with two 12" zones, each on its own thermostat and 25,000 BTU burner, for 50,000 BTU in total. The 1" polished steel plate gives a 23-9/10" x 19-9/10" work area, about 476 sq in. It weighs 161 lb (195 lb shipped).
It is set up for natural gas: a 4" W.C. regulator and #42 burner nozzles. The ATTG-24-LP is the same griddle for propane, with a 10" W.C. regulator and #53 nozzles. Atosa's manual says a licensed technician can convert between gases.
Thermostatic or manual? The ATTG holds each zone at a set temperature. The manual ATMG-24-NG is the same width with 30,000 BTU burners (60,000 BTU total) and a 3/4" plate, so it has more burner output, but you set the flame by hand. For a deeper 24" plate front to back, the natural gas only CookRite ATG-2424-S has 60,000 BTU across the same two zones. One more zone: the ATTG-36-NG is 36" wide. Building a line? The ATRC-24-NG radiant and ATCB-24 lava rock charbroilers are the same 24" width and 15-1/5" height, and 1" shallower at 27-3/5" deep.
Good For
- Cafés and small breakfast counters: two zones, one for eggs and one for bacon
- Kitchens with a short line: 24" wide and 161 lb
- Sandwich and panini shops: grilled sandwiches at a set temperature
- Natural gas kitchens: a 4" W.C. regulator comes standard
Built for Daily Commercial Use
- Stainless steel exterior and interior
- Stainless steel grease drawer
- Heavy duty 1" thick polished steel griddle plate
- 25,000 BTU burner for each 12" section, with standby pilots
- Independent thermostatic control for each 12" section
- Stainless steel legs standard
- 3/4" NPT rear gas connection and regulator standard
Pick the Right Size
| Model | Gas | Width | Burners | Total BTU |
|---|---|---|---|---|
| ATTG-24-NG (this model) | Natural gas | 24" | 2 | 50,000 |
| ATTG-24-LP | Propane | 24" | 2 | 50,000 |
| ATTG-36-NG | Natural gas | 36" | 3 | 75,000 |
| ATTG-36-LP | Propane | 36" | 3 | 75,000 |
| ATTG-48-NG | Natural gas | 48" | 4 | 100,000 |
| ATTG-48-LP | Propane | 48" | 4 | 100,000 |
Need propane? See the Atosa ATTG-24-LP. Want manual controls? See the Atosa ATMG-24-NG.
Shop all commercial griddles, including natural gas and thermostatic models.
Buy the Atosa ATTG-24-NG in Seattle
Encore Seattle sells the Atosa ATTG-24-NG new, not used, with the full manufacturer warranty. If you are pricing a commercial griddle in Seattle, it ships with free freight to Seattle restaurants on orders over $500, and we offer 1-3 day delivery from 12 distribution centers. We deliver to kitchens in Queen Anne, Belltown, the International District and Columbia City, and to restaurants across the lower 48.
Compare more options in our Commercial Griddles Seattle collection, or call or text +1 (206) 419-5801 with questions.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Countertop thermostatic gas griddle |
| Gas type | Natural gas |
| Griddle plate | 1" thick polished steel |
| Work area | 23-9/10" x 19-9/10" |
| Burners | 2, 25,000 BTU each |
| Total BTU | 50,000 |
| Controls | Independent thermostatic, one per 12" section |
| Gas pressure (regulator) | 4" W.C. |
| Gas connection | 3/4" NPT, rear, with regulator |
| Burner nozzle (per Atosa manual) | #42 |
| Grease drawer | Stainless steel |
| Legs | Stainless steel |
| Construction | Stainless steel exterior and interior |
| Exterior dimensions | 24" W x 28-3/5" D x 15-1/5" H |
| Net weight | 161 lb |
| Shipping weight | 195 lb |
| Warranty | 1 year parts and labor (US only) |
| Certifications | cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b |
Before You Order
- This is the natural gas model. Order the ATTG-24-LP for propane.
- Gas: 3/4" NPT rear connection with a regulator. Atosa sets it at 4" W.C. for natural gas.
- Check your counter: the ATTG-24-NG is 24" wide, 28-3/5" deep and 15-1/5" tall. It weighs 161 lb, so use a counter or stand rated for that weight.
- Atosa's manual says to set it on a non-combustible counter, leave at least 6" on both sides and the back and 4" below, and install it under an exhaust hood as local code requires.
- Atosa's manual says an authorized, licensed technician must install it, and that it is not for outdoor use.
Before First Use and Care
- The plate ships with a protective coating. Heat it to 200°F to 300°F to loosen the coating, clean it off with a non-corrosive cleaner, rinse and wipe dry.
- Season the plate before first use and after every cleaning: heat to 300°F to 350°F, spread about 1 oz of cooking oil per square foot in a thin film, wipe off the extra, and repeat until it looks slick.
- Expect some smoke the first time you heat it. Atosa says it goes away after running at full heat for about an hour.
- Do not hose down or pressure wash the griddle (the catch tray is the exception), and do not use abrasive or corrosive cleaners.
- Atosa says to have the griddle checked once a year by an authorized, licensed technician.
Atosa ATTG-24-NG FAQ
What size is the Atosa ATTG-24-NG?
24" wide, 28-3/5" deep and 15-1/5" tall, with a 23-9/10" x 19-9/10" work area. It weighs 161 lb, or 195 lb shipped.
How many BTU is the ATTG-24-NG?
50,000 BTU total from two 25,000 BTU burners, on natural gas. The propane ATTG-24-LP has the same rating.
How thick is the ATTG-24-NG griddle plate?
1" thick polished steel, thicker than the 3/4" plate on the manual ATMG-24-NG.
Does the ATTG-24-NG have thermostatic controls?
Yes. Each of the two 12" sections has its own thermostat, so you can hold two temperatures at once.
What gas connection does the ATTG-24-NG need?
A 3/4" NPT rear connection. It has a regulator set at 4" W.C. for natural gas.
Can the ATTG-24-NG be switched to propane?
Atosa's manual says a licensed technician can switch the gas type by changing the burner nozzles, the pilot orifices and the regulator.
How much space does the ATTG-24-NG need around it?
Atosa's manual says at least 6" on both sides and the back, and 4" below. With 6" on each side, plan about 36" of width for the ATTG-24-NG.
How do I season the ATTG-24-NG?
Heat the plate to 300°F to 350°F, spread about 1 oz of cooking oil per square foot in a thin film, wipe off the extra, and repeat until the surface is slick.
What certifications does the ATTG-24-NG have?
cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b.
What warranty comes with the ATTG-24-NG?
1 year parts and labor (US only) on the ATTG-24-NG.
Should I choose the ATTG-24-NG or the manual ATMG-24-NG?
Choose the ATTG-24-NG if you want each zone held at a set temperature with a 1" plate. The ATMG-24-NG is the same 24" width with manual valves, a 3/4" plate and more burner output (60,000 BTU vs. 50,000). Both run on natural gas.
Where can I buy the Atosa ATTG-24-NG in Seattle?
Right here at Encore Seattle. The ATTG-24-NG is new and ships to your restaurant with free freight on orders over $500.
How fast can I get the ATTG-24-NG in Seattle?
We offer 1-3 day delivery from 12 distribution centers. Call or text +1 (206) 419-5801 to check timing for your address.