Atosa ACHP-6-LP 36-Inch 6 Burner Countertop Hot Plate, Propane, 192,000 BTU
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa ACHP-6-LP is a 36" countertop hot plate with 6 burners and 192,000 BTU on propane. Each burner has its own manual control, and the grates are heavy-duty cast iron.
At a Glance
- Size: 36" W x 27-3/5" D x 13-1/10" H
- Burners: 6 at 32,000 BTU each, 192,000 BTU total, propane
- Controls: independent manual control for each burner
- Grates: heavy-duty cast iron
- Crumb tray: full width, stainless steel
- Certifications: cETLus, ETL-Sanitation
- Warranty: 1 year parts and labor (US only)
Most units ship within one business day from our warehouse with free freight and free lift gate to Seattle restaurants and the lower 48.
A 36" Countertop Gas Stove on Propane
This countertop gas stove is 36" wide with six 32,000 BTU burners on propane. Each burner has its own manual control, and the top grates are heavy-duty cast iron.
Running the ACHP-6-LP on Propane
The ACHP-6-LP is set up for propane from the factory, with a regulator at 10" W.C. and LPG51 burner nozzles per Atosa's manual. It keeps the full rating on propane: six 32,000 BTU burners, 192,000 BTU in all, the same as the ACHP-6-NG.
It is 36" wide and 134 lb, so it fits where a range will not. Leave 48" of counter width for the 6" side clearances in Atosa's manual, and set it on a non-combustible counter under a hood as local code requires.
Want an oven base on propane? See the AGR-6B-LP. For a heavy stock pot on propane, see the ATSP-18-1-LP.
Good For
- Large propane kitchens: six burners where there is no gas main
- Camps and resorts: volume cooking on propane
- Banquet and catering: six pans of sauces and sides at once
- Busy propane lines: 192,000 BTU across 36" of counter
Built for Daily Commercial Use
- Stainless steel exterior and interior
- Stainless steel full width crumb tray
- 32,000 BTU heavy-duty burners with a standing pilot
- Heavy-duty cast iron top grates
- Independent manual controls for each burner
- Stainless steel legs standard
- 3/4" NPT rear gas connection and regulator standard
Pick the Right Size
| Model | Width | Burners | Total BTU | Net weight |
|---|---|---|---|---|
| ACHP-2-LP | 12" | 2 | 64,000 | 54 lb |
| ACHP-4-LP | 24" | 4 | 128,000 | 94 lb |
| ACHP-6-LP (this model) | 36" | 6 | 192,000 | 134 lb |
Need natural gas? See the Atosa ACHP-6-NG. Want an oven under the burners? See the Atosa AGR-6B-LP.
Shop all commercial charbroilers, broilers and hot plates.
Buy the Atosa ACHP-6-LP in Seattle
Encore Seattle sells the Atosa ACHP-6-LP new, not used, with the full manufacturer warranty. If you are pricing a commercial hot plate in Seattle, it ships with free freight to Seattle restaurants on orders over $500, and we offer 1-3 day delivery from 12 distribution centers. We deliver to kitchens in Pioneer Square, Wallingford, the U District and West Seattle, and to restaurants across the lower 48.
Compare more options in our Commercial Hot Plates Seattle collection, or call or text +1 (206) 419-5801 with questions.
Specifications
| Spec | Detail |
|---|---|
| Configuration | 36" countertop hot plate, 6 open burners |
| Gas type | Propane (LP) |
| Burners | 6 at 32,000 BTU each, standing pilots |
| Total BTU | 192,000 |
| Controls | Independent manual, one per burner |
| Grates | Heavy-duty cast iron |
| Crumb tray | Stainless steel, full width |
| Gas pressure (regulator) | 10" W.C. |
| Gas connection | 3/4" NPT, rear, regulator standard |
| Burner nozzle (per Atosa manual) | NG37 natural gas, LPG51 propane |
| Legs | Stainless steel |
| Construction | Stainless steel exterior and interior |
| Exterior dimensions | 36" W x 27-3/5" D x 13-1/10" H |
| Net weight | 134 lb |
| Shipping weight | 180 lb |
| Warranty | 1 year parts and labor (US only) |
| Certifications | cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b |
Before You Order
- This is the propane model. Order the ACHP-6-NG for natural gas.
- Gas: 3/4" NPT rear connection with a regulator. Atosa lists the regulator at 10" W.C. for propane.
- Check your counter: the ACHP-6-LP is 36" wide, 27-3/5" deep and 13-1/10" tall. It weighs 134 lb. With Atosa's side clearances, plan for 48" of counter width.
- Atosa's manual says to set it on a non-combustible counter, leave at least 6" on both sides and the back and 4" below, and install it under an exhaust hood as local code requires.
- Atosa's manual says an authorized, licensed technician must install it, and that it is not for outdoor use.
- Atosa's manual says switching gas type means changing the burner nozzles and the regulator, and that only an authorized, licensed technician should do it.
Setup and Care
- Atosa says to wipe it with a mild detergent before the first use.
- Atosa says to preheat the burners for 15 to 20 minutes, then set the flame for what you are cooking.
- Expect some smoke the first time you heat it. Atosa says it goes away after running at full heat for about an hour.
- Atosa says to empty and wipe the crumb tray after each use, once the unit cools.
- Atosa says not to hose down or pressure wash it (the crumb tray is the exception), and not to use abrasive or corrosive cleaners.
- Atosa says to have it checked once a year by an authorized, licensed technician.
Atosa ACHP-6-LP FAQ
What size is the Atosa ACHP-6-LP?
36" wide, 27-3/5" deep and 13-1/10" tall. It weighs 134 lb, or 180 lb shipped. With 6" clearance on each side, plan for 48" of counter width.
How many BTU is the ACHP-6-LP?
192,000 BTU on propane: six burners at 32,000 BTU each. Propane does not lower the rating.
Can I control each burner on the ACHP-6-LP separately?
Yes. All six burners have their own manual valve and standing pilot.
What gas connection does the ACHP-6-LP need?
A 3/4" NPT rear connection with the included regulator, set at 10" W.C. for propane. Atosa's manual lists LPG51 burner nozzles for propane.
How much space does the ACHP-6-LP need around it?
Atosa's manual says at least 6" on both sides and the back, and 4" below, on a non-combustible counter. For the 36" ACHP-6-LP, that means 48" of counter width.
Can I use the ACHP-6-LP outdoors?
No. Atosa's manual says it is not for outdoor use and must go under an exhaust hood as local code requires.
Can I get the ACHP-6-LP in natural gas?
Yes. The ACHP-6-NG has the same six burners and 192,000 BTU on natural gas, with a 4" W.C. regulator.
What certifications does the ACHP-6-LP have?
cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b.
What warranty comes with the ACHP-6-LP?
1 year parts and labor (US only) on the ACHP-6-LP.
Can I convert the ACHP-6-LP to natural gas later?
Atosa's manual says switching gas type means changing the burner nozzles and the regulator, done by an authorized, licensed technician. If you know you will be on natural gas, order the ACHP-6-NG instead.
Where can I buy the Atosa ACHP-6-LP in Seattle?
Right here at Encore Seattle. The ACHP-6-LP is new and ships to your restaurant with free freight on orders over $500.
How fast can I get the ACHP-6-LP in Seattle?
We offer 1-3 day delivery from 12 distribution centers. Call or text +1 (206) 419-5801 to check timing for your address.