Atosa ACHP-2-NG 12-Inch 2 Burner Countertop Hot Plate, Natural Gas, 64,000 BTU
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa ACHP-2-NG is a 12" countertop hot plate with 2 burners and 64,000 BTU on natural gas. Each burner has its own manual control, and the grates are heavy-duty cast iron.
At a Glance
- Size: 12" W x 27-3/5" D x 13-1/10" H
- Burners: 2 at 32,000 BTU each, 64,000 BTU total, natural gas
- Controls: independent manual control for each burner
- Grates: heavy-duty cast iron
- Crumb tray: full width, stainless steel
- Certifications: cETLus, ETL-Sanitation
- Warranty: 1 year parts and labor (US only)
Most units ship within one business day from our warehouse with free freight and free lift gate to Seattle restaurants and the lower 48.
A 12" 2 Burner Hot Plate
This 2 burner hot plate is 12" wide with two 32,000 BTU burners and 64,000 BTU in total. Each burner has its own manual control and a standing pilot, and the top grates are heavy-duty cast iron. It runs on natural gas.
Is the ACHP-2-NG the Right Hot Plate for Your Kitchen?
The ACHP-2-NG puts two 32,000 BTU open burners, 64,000 BTU in total, on 12" of counter. Every burner has its own valve and standing pilot, so you can run one pan at a simmer and the next at full flame.
Plan for 24" of counter width: Atosa's manual calls for at least 6" of clearance on both sides and the back. It weighs 54 lb, or 74 lb shipped. At 27-3/5" deep, it matches the depth of Atosa's ATRC charbroilers, so it can sit in the same counter run.
Need more burners? The ACHP-4-NG doubles it to four in 24". Want two more burners? The ACHP-4-NG is 24" wide.
Good For
- Sauce and soup stations: two burners on a 12" footprint
- Cafes and coffee shops: a small burner station with no full range
- Added burners on a line: fits beside a griddle or charbroiler
- Prep areas: blanching, reductions and stocks off the main range
Built for Daily Commercial Use
- Stainless steel exterior and interior
- Stainless steel full width crumb tray
- 32,000 BTU heavy-duty burners with a standing pilot
- Heavy-duty cast iron top grates
- Independent manual controls for each burner
- Stainless steel legs standard
- 3/4" NPT rear gas connection and regulator standard
Pick the Right Size
| Model | Width | Burners | Total BTU | Net weight |
|---|---|---|---|---|
| ACHP-2-NG (this model) | 12" | 2 | 64,000 | 54 lb |
| ACHP-4-NG | 24" | 4 | 128,000 | 94 lb |
| ACHP-6-NG | 36" | 6 | 192,000 | 134 lb |
Need propane? See the Atosa ACHP-2-LP. Want an oven under the burners? See the Atosa AGR-4B-NG.
Shop all commercial charbroilers, broilers and hot plates.
Buy the Atosa ACHP-2-NG in Seattle
Encore Seattle sells the Atosa ACHP-2-NG new, not used, with the full manufacturer warranty. If you are pricing a commercial hot plate in Seattle, it ships with free freight to Seattle restaurants on orders over $500, and we offer 1-3 day delivery from 12 distribution centers. We deliver to kitchens in Queen Anne, Belltown, the International District and Columbia City, and to restaurants across the lower 48.
Compare more options in our Commercial Hot Plates Seattle collection, or call or text +1 (206) 419-5801 with questions.
Specifications
| Spec | Detail |
|---|---|
| Configuration | 12" countertop hot plate, 2 open burners |
| Gas type | Natural gas |
| Burners | 2 at 32,000 BTU each, standing pilots |
| Total BTU | 64,000 |
| Controls | Independent manual, one per burner |
| Grates | Heavy-duty cast iron |
| Crumb tray | Stainless steel, full width |
| Gas pressure (regulator) | 4" W.C. |
| Gas connection | 3/4" NPT, rear, regulator standard |
| Burner nozzle (per Atosa manual) | NG37 natural gas, LPG51 propane |
| Legs | Stainless steel |
| Construction | Stainless steel exterior and interior |
| Exterior dimensions | 12" W x 27-3/5" D x 13-1/10" H |
| Net weight | 54 lb |
| Shipping weight | 74 lb |
| Warranty | 1 year parts and labor (US only) |
| Certifications | cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b |
Before You Order
- This is the natural gas model. Order the ACHP-2-LP for propane.
- Gas: 3/4" NPT rear connection with a regulator. Atosa lists the regulator at 4" W.C. for natural gas.
- Check your counter: the ACHP-2-NG is 12" wide, 27-3/5" deep and 13-1/10" tall. It weighs 54 lb. With Atosa's side clearances, plan for 24" of counter width.
- Atosa's manual says to set it on a non-combustible counter, leave at least 6" on both sides and the back and 4" below, and install it under an exhaust hood as local code requires.
- Atosa's manual says an authorized, licensed technician must install it, and that it is not for outdoor use.
- Atosa's manual says switching gas type means changing the burner nozzles and the regulator, and that only an authorized, licensed technician should do it.
Setup and Care
- Atosa says to wipe it with a mild detergent before the first use.
- Atosa says to preheat the burners for 15 to 20 minutes, then set the flame for what you are cooking.
- Expect some smoke the first time you heat it. Atosa says it goes away after running at full heat for about an hour.
- Atosa says to empty and wipe the crumb tray after each use, once the unit cools.
- Atosa says not to hose down or pressure wash it (the crumb tray is the exception), and not to use abrasive or corrosive cleaners.
- Atosa says to have it checked once a year by an authorized, licensed technician.
Atosa ACHP-2-NG FAQ
What size is the Atosa ACHP-2-NG?
12" wide, 27-3/5" deep and 13-1/10" tall. It weighs 54 lb, or 74 lb shipped. With 6" clearance on each side, plan for 24" of counter width.
How many BTU is the ACHP-2-NG?
64,000 BTU on natural gas: two burners at 32,000 BTU each.
Can I control each burner on the ACHP-2-NG separately?
Yes. All two burners have their own manual valve and standing pilot.
What gas connection does the ACHP-2-NG need?
A 3/4" NPT rear connection with the included regulator, set at 4" W.C. for natural gas. Atosa's manual lists NG37 burner nozzles for natural gas.
How much space does the ACHP-2-NG need around it?
Atosa's manual says at least 6" on both sides and the back, and 4" below, on a non-combustible counter. For the 12" ACHP-2-NG, that means 24" of counter width.
Can I use the ACHP-2-NG outdoors?
No. Atosa's manual says it is not for outdoor use and must go under an exhaust hood as local code requires.
Can I get the ACHP-2-NG in propane?
Yes. The ACHP-2-LP has the same two burners and 64,000 BTU on propane, with a 10" W.C. regulator.
What certifications does the ACHP-2-NG have?
cETLus, ETL-Sanitation; conforms to NSF/ANSI 4 and ANSI Z83.11b; certified to CSA 1.8b.
What warranty comes with the ACHP-2-NG?
1 year parts and labor (US only) on the ACHP-2-NG.
Is a 2 burner hot plate enough?
For a sauce or soup station, or to add burners beside a griddle, two 32,000 BTU burners in 12" is often enough. If you run more than two pans at once, the ACHP-4-NG has four in 24".
Where can I buy the Atosa ACHP-2-NG in Seattle?
Right here at Encore Seattle. The ACHP-2-NG is new and ships to your restaurant with free freight on orders over $500.
How fast can I get the ACHP-2-NG in Seattle?
We offer 1-3 day delivery from 12 distribution centers. Call or text +1 (206) 419-5801 to check timing for your address.