Atosa CookRite PCG9 Single Tank Gas Pasta Cooker - 9 Gallon, 46,000 BTU
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa CookRite PCG9 is a single tank commercial gas pasta cooker for restaurants, cafés, bistros, and catering kitchens that want a dedicated boiling station without giving up line space. At 15 3/4" wide, it fits into most cook lines and takes pasta, noodles, blanching, and rethermalizing off your range, so burners stay free for sauces and sautés during the rush.
A 9-gallon SUS316 stainless steel tank and a 46,000 BTU burner hold a steady rolling boil through service, and four included portion baskets let one cook run multiple orders at once. Available in natural gas (PCG9-NG) or liquid propane (PCG9-LP).
Built for the Pasta Station
The PCG9 is a dedicated boiling station for operators who cook to order:
- Italian restaurants and bistros — spaghetti, fettuccine, penne, and fresh pasta cooked to order in portion baskets
- Noodle and ramen shops — ramen, udon, soba, and rice noodles without tying up range burners
- Cafés and pubs — a compact pasta station for lunch specials and a few noodle dishes
- Catering kitchens — batch pasta, blanched vegetables, and boiled eggs for events
- Gluten-free programs — a separate pasta cooker dedicated to gluten-free pasta to reduce cross-contact
- Rethermalizing — reheat sealed soups, sauces, and pre-cooked portions in steady boiling water
What the PCG9 Adds to Your Gas and Water Load
Before the PCG9 goes on the line, it helps to know what it asks of your utilities:
- Gas at full flame: 46,000 BTU/hr is roughly 46 cubic feet of natural gas per hour, or about half a gallon of propane per hour. Once the water is boiling and the flame is turned down, use drops.
- Water per fill: 9 gallons is about 75 lb of water, so plan on draining through the 1" valve rather than tipping or bailing the tank.
- Line space: 15 3/4" wide plus 6" side clearance from combustible surfaces, or 0" next to non-combustible surfaces like a stainless fryer or range.
- One connection of each: one 3/4" MIP gas inlet, one 3/4" MNPT water inlet, and one 1" drain.
SUS316 Stainless Steel Tank
A pasta cooker tank sits in boiling, salted, starchy water for hours every day. The PCG9 uses SUS316 stainless steel, a grade that resists salt corrosion better than the more common 304 stainless. The tank is deep-drawn from a single sheet, then sandblasted and electropolished for a smooth finish that rinses clean. It's welded to the top, which removes the seam where water and debris usually collect. The 8" deep tank holds 9 gallons with a 35 L cooking area volume.
Controls and Safety
Manual knob controls with an adjustable flame level keep operation simple, with no circuit boards or touchscreens to fail. Piezoelectric ignition lights the burner without matches, and a high-limit safety shut-off protects the unit from overheating. Water is added manually through an inlet pipe and valve, and a 1" NPT drain valve empties the tank quickly at the end of the day or between water changes. The stainless steel exterior, cabinet base, and 4" to 6" adjustable legs keep the unit level and stable on uneven kitchen floors.
Baskets Included
The PCG9 ships with (2) 1/3-size baskets, (1) 1/6-size left basket, and (1) 1/6-size right basket. Use the 1/6 baskets for individual cook-to-order portions and the 1/3 baskets for larger orders, blanching, or batch cooking. Extra and replacement baskets are available: 1/3 basket (R06018000023), 1/6 left basket (R06018000024), and 1/6 right basket (R06018000025).
Buy the Atosa PCG9-NG in Seattle
Encore Seattle sells the Atosa PCG9-NG new, not used, with the full manufacturer warranty. If you are pricing a pasta cooker in Seattle, it ships with free freight and free lift gate to Seattle restaurants on orders over $500, and we offer 1-3 day delivery from 12 distribution centers. We deliver to kitchens in Pioneer Square, Wallingford, the U District and West Seattle, and to restaurants across the lower 48.
Compare more options in our Cooking Equipment collection, or call or text +1 (206) 419-5801 with questions.
Specifications
| Spec | Detail |
|---|---|
| Model | PCG9-NG (natural gas) / PCG9-LP (liquid propane) |
| Configuration | Freestanding gas pasta cooker, single tank |
| Tank capacity | 9 gallons |
| Cooking area volume | 35 L |
| Tank depth | 8" |
| Tank construction | SUS316 stainless steel, deep-drawn, sandblasted and electropolished, welded to top |
| Burners | 1 |
| Total BTU | 46,000 BTU/hr |
| Gas manifold pressure | NG: 4" W.C. / LP: 10" W.C. |
| Gas connection | 3/4" MIP |
| Water inlet | 3/4" MNPT, manual fill valve |
| Drain | 1" NPT drain valve |
| Ignition | Piezoelectric |
| Controls | Manual knobs, adjustable flame level |
| Safety | High-limit safety shut-off |
| Baskets included | (2) 1/3-size, (1) 1/6-size left, (1) 1/6-size right |
| Exterior dimensions | 15 3/4" W x 35 3/7" D x 44 7/8" H |
| Legs | 4" to 6" adjustable |
| Net weight | 121 lb |
| Shipping weight | 195.8 lb |
| Clearances | 6" combustible sides/rear; 0" non-combustible |
| Warranty | 1-year parts and labor |
| Certifications | ETL, ETL Sanitation, cETLus |
Installation and Clearance
Order the version that matches your gas supply: PCG9-NG for natural gas or PCG9-LP for liquid propane. The unit connects through a 3/4" MIP gas inlet and a 3/4" MNPT water inlet, and the 1" drain needs a path to a floor drain or approved drain. Maintain 6" clearance from combustible surfaces on the sides and rear (0" from non-combustible surfaces), and install under a properly sized commercial kitchen hood. Always have a licensed gas professional complete the gas hookup.
PCG9 vs PCG18
Both CookRite pasta cookers use the same 9-gallon SUS316 tank, the same 46,000 BTU burner, and the same manual controls. The difference is how many of each you get:
- Tanks: PCG9 has one. The PCG18 has two, each with its own burner, controls, and ignition.
- Width: 15 3/4" for the PCG9 vs 31 1/2" for the PCG18.
- Gas load: 46,000 BTU/hr vs 92,000 BTU/hr.
- Baskets: four vs nine.
- Weight: 121 lb vs 217.8 lb net.
Choose the PCG9 when pasta is one menu category among several or the line has no room for a 31 1/2" unit. Choose the PCG18 when you need separate water for gluten-free or blanching, or want to keep cooking while one tank drains.
Why Operators Choose Atosa CookRite
The PCG9 keeps the parts list short: one burner, one set of knobs, piezo ignition, and a 316 tank, with a 1-year parts and labor warranty. Atosa equipment ships with free freight to the lower 48 on qualifying orders. Browse both models in our commercial pasta cooker collection, or spread the cost with restaurant equipment financing.
Frequently Asked Questions
Is the PCG9 available in natural gas and propane?
Yes. PCG9-NG is the natural gas version and PCG9-LP is the liquid propane version. Pick the one that matches the gas at your cook line. Switching gas types later takes the correct conversion parts and a qualified technician.
How much gas does the PCG9 use?
One burner rated at 46,000 BTU/hr, fed through a 3/4" MIP connection. Manifold pressure is 4" W.C. on natural gas and 10" W.C. on propane.
How many cubic feet of gas per hour does the PCG9 burn?
At full flame, 46,000 BTU/hr works out to roughly 46 cubic feet of natural gas per hour (using about 1,000 BTU per cubic foot), or about half a gallon of propane per hour. Actual use is lower once the water is at a boil and the flame is turned down.
Does the PCG9 need a water line and floor drain?
Plan for both. The tank fills by hand through a 3/4" MNPT inlet and valve, and a 1" NPT drain valve empties it. The drain needs a path to a floor drain or another approved drain at the install spot.
Does the PCG9 need to go under a hood?
Yes. It is a gas cooking appliance, so it goes under a commercial hood sized to meet your local code.
How much clearance does the PCG9 need?
6" from combustible surfaces on the sides and rear, and 0" from non-combustible surfaces.
What are the exact dimensions of the PCG9?
Atosa's spec sheet lists the PCG9 at 15 3/4" W x 35 3/7" D x 44 7/8" H, with 4" to 6" adjustable legs. Net weight is 121 lb and shipping weight is 195.8 lb.
What baskets come with the PCG9?
Four baskets: (2) 1/3-size, (1) 1/6-size left, and (1) 1/6-size right. Extra baskets use part numbers R06018000023 (1/3), R06018000024 (1/6 left), and R06018000025 (1/6 right).
Does the PCG9 have automatic basket lifts or auto-fill?
No. Controls are manual knobs and the tank fills through a manual valve. Fewer parts means less to service, and a kitchen timer covers cook times.
Why does the PCG9 tank use SUS316 stainless steel?
316 stainless contains molybdenum, which holds up to salt better than standard 304 stainless. A pasta tank sits in salted water all day, so the grade matters.
What is the difference between the PCG9 and the PCG18?
The PCG9 is one 9-gallon tank, one 46,000 BTU burner and 15 3/4" of line space. The PCG18 is two independently controlled 9-gallon tanks, 92,000 BTU total and 31 1/2" wide.
What warranty comes with the PCG9?
1-year parts and labor from Atosa.
Is the PCG9 certified for commercial kitchens?
Yes. It is ETL listed, ETL Sanitation listed, and cETLus listed.
Where can I buy the Atosa PCG9-NG in Seattle?
Right here at Encore Seattle. The PCG9-NG is new and ships to your restaurant with free freight on orders over $500.
How fast can I get the PCG9-NG in Seattle?
We offer 1-3 day delivery from 12 distribution centers. Call or text +1 (206) 419-5801 to check timing for your address.