Atosa MKC58GR 58-Inch Direct Draw Keg Cooler, 2 Half Barrels, 4 Taps
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa MKC58GR is a 57-4/5" wide direct draw keg cooler. It holds 2 half barrel kegs plus 2 sixth barrels at 35°F to 38°F and pours from 4 taps. It plugs into a standard 115V outlet.
At a Glance
- Size: 57-4/5" W x 28-1/10" D x 40-1/10" H
- Kegs: holds 2 half barrel kegs plus 2 sixth barrels, or up to 8 sixth barrel kegs
- Taps: 2 dual tap towers (4 taps), manifold and ball taps included
- Doors: 2 solid doors with locks, recessed handles
- Temperature: 35°F to 38°F
- Power: 115V, 2.3 amps, standard plug (NEMA 5-15P)
- Warranty: 3 years parts and labor, 5 years compressor
Most units ship within one business day from our warehouse with free freight and free lift gate to Seattle restaurants and the lower 48.
A 2 Keg Kegerator
This 2 keg kegerator holds two half barrels plus two sixth barrels behind two doors. Beer goes straight from the keg below to four taps on top.
How Many Kegs Fit
From the Atosa spec sheet. Pick one of these loads:
| What fits | Load |
|---|---|
| 2 half barrels plus 2 sixth barrels | Mixed load |
| 4 slim quarters plus 4 sixth barrels | Mixed load |
| 2 quarter barrels plus 2 sixth barrels | Mixed load |
| 8 sixth barrels | One keg size |
| 8 Corny kegs | One keg size |
| 8 "The Greg" kegs | One keg size |
Is the 58" MKC58GR Right for Your Bar?
The MKC58GR is 57-4/5" wide and holds 2 half barrel kegs plus 2 sixth barrels, or up to 8 sixth barrel kegs. It has two doors and pours through 2 dual tap towers (4 taps). It suits neighborhood bars and restaurants pouring four drafts, with room for a backup keg or two.
Need more kegs? See the 68" MKC68GR. Less space? See the 23" MKC23GR.
Built for Daily Commercial Use
- Stainless steel inside and out
- Heavy duty Embraco compressor with R290, a natural refrigerant
- Slide out compressor assembly for easy service
- Electronic temperature controller
- 2 dual tap towers (4 taps)
- Manifold and ball taps included
- Stainless steel drip tray
- Recessed door handles
- Interior light
- Magnetic door gaskets
- Door locks standard
- Pre-installed 2" casters
- Can be fitted with 1.2", 1.5", 4" or 5" casters
Pick the Right Size
| Model | Width | Doors | Half barrels | Taps |
|---|---|---|---|---|
| MKC23GR | 23" | 1 | 1 | 2 |
| MKC58GR (this model) | 57-4/5" | 2 | 2 | 4 |
| MKC68GR | 68" | 2 | 3 | 4 |
| MKC90GR | 89-3/10" | 3 | 4 | 4 |
Shop all draft beer coolers or our bar refrigeration.
Buy the Atosa MKC58GR in Seattle
Encore Seattle sells the Atosa MKC58GR new, not used, with the full manufacturer warranty. If you are pricing a kegerator in Seattle, it ships with free freight to Seattle restaurants on orders over $500, and we offer 1-3 day delivery from 12 distribution centers. We deliver to kitchens in Downtown Seattle, Lake City, Interbay and Madison Park, and to restaurants across the lower 48.
Compare more options in our Beverage collection, or call or text +1 (206) 419-5801 with questions.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Direct draw keg cooler, two solid doors |
| Keg capacity | 2 half barrels, or 8 sixth barrels (see keg table) |
| Taps | 2 dual tap towers (4 taps), manifold and ball taps included |
| Doors | 2 solid doors with locks, recessed handles, magnetic gaskets |
| Capacity | 17.3 cu. ft. |
| Shelves | None (open floor for kegs) |
| Exterior dimensions | 57-4/5" W x 28-1/10" D x 40-1/10" H |
| Height with tap towers | 55-3/5" |
| Temperature range | 35°F to 38°F |
| Temperature control | Electronic |
| Compressor | 1/7 HP Embraco, slide out assembly |
| Refrigerant | R290 |
| Construction | Stainless steel interior and exterior |
| Drip tray | Stainless steel |
| Lighting | Interior light |
| Casters | 2", pre-installed; can be fitted with 1.2", 1.5", 4" or 5" casters |
| Electrical | 115V / 60Hz / 1-phase, 2.3 amps |
| Plug | NEMA 5-15P |
| Net weight | 209 lb |
| Shipping weight | 243 lb |
| Warranty | 3-year parts and labor, 5-year compressor |
| Certifications | cETLus, ETL-Sanitation |
Before You Order
- Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
- Check your space: the unit is 57-4/5" wide and 28-1/10" deep. It is 40-1/10" tall to the top, and 55-3/5" tall to the top of the tap towers.
- With a door open, the unit needs about 50" of depth from the back of the cabinet.
- The Atosa sheet does not list a CO2 tank or regulator, so plan to supply your own.
- Plan your kegs: it holds 2 half barrel kegs plus 2 sixth barrels, or up to 8 sixth barrel kegs. Check the keg table above for every load before you order kegs.
- Plan the delivery: the MKC58GR weighs 209 lb (243 lb shipping weight).
- Leave the unit some room to breathe and clean the condenser often, as Atosa advises.
Atosa MKC58GR FAQ
How many kegs fit in the Atosa MKC58GR?
The MKC58GR holds 2 half barrel kegs plus 2 sixth barrel kegs. It can also hold 8 sixth barrel kegs or 8 Corny kegs. See the keg table above for every load.
How many taps does the MKC58GR have?
It has 2 dual tap towers (4 taps). The manifold and ball taps are included.
What size is the MKC58GR?
It is 57-4/5" wide, 28-1/10" deep and 40-1/10" tall, or 55-3/5" tall to the top of the tap towers. It weighs 209 lb (243 lb shipping weight).
What temperature does the MKC58GR hold?
It holds 35°F to 38°F with an electronic temperature controller, keeping 2 half barrel kegs plus 2 sixth barrels cold for the taps above.
Is the MKC58GR ENERGY STAR rated?
No. The MKC keg coolers are not ENERGY STAR rated.
Does the MKC58GR lock?
Yes. All 2 doors have locks as standard on the MKC58GR, so the kegs stay secured after closing.
Can I change the casters on the MKC58GR?
Yes. It ships on 2" casters, and Atosa says it can be fitted with 1.2", 1.5", 4" or 5" casters.
What is a direct draw keg cooler?
A direct draw keg cooler holds kegs inside and pours beer through taps on top. The beer only travels a short way, from the keg to the tap, so there are no long lines to run.
What power does the MKC58GR need?
The MKC58GR runs on 115V and draws 2.3 amps. Its standard NEMA 5-15P plug goes into a regular 115V outlet behind the bar.
How often should I clean the MKC58GR condenser?
Atosa says to clean the condenser frequently and to leave the unit some room to breathe. The compressor assembly slides out for easy service. The 209 lb MKC58GR rolls on casters when you need to pull it out.
What warranty comes with the MKC58GR?
3 years parts and labor and 5 years on the compressor.
Where can I buy the Atosa MKC58GR in Seattle?
Right here at Encore Seattle. The MKC58GR is new and ships to your restaurant with free freight on orders over $500.
How fast can I get the MKC58GR in Seattle?
We offer 1-3 day delivery from 12 distribution centers. Call or text +1 (206) 419-5801 to check timing for your address.