Atosa MKC23GR 23-Inch Direct Draw Keg Cooler, 1 Half Barrel, 2 Taps
See current pricing, availability and checkout for this item at The Restaurant Warehouse, our main store.
See Price & Buy at The Restaurant WarehouseThe Atosa MKC23GR is a 23" wide direct draw keg cooler. It holds 1 half barrel keg at 35°F to 38°F and pours from 2 taps. It plugs into a standard 115V outlet.
At a Glance
- Size: 23" W x 31-1/10" D x 39-1/4" H (cabinet)
- Kegs: holds 1 half barrel keg, or up to 4 sixth barrel kegs
- Taps: 1 dual tap tower (2 taps), manifold and ball taps included
- Doors: 1 solid door with lock, recessed handle
- Temperature: 35°F to 38°F
- Power: 115V, 2.3 amps, standard plug (NEMA 5-15P)
- Warranty: 3 years parts and labor, 5 years compressor
Most units ship within one business day from our warehouse with free freight and free lift gate to Seattle restaurants and the lower 48.
A Commercial Kegerator
This commercial kegerator is only 23" wide. It holds one half barrel keg and pours two beers from one dual tap tower, with the manifold and ball taps included.
How Many Kegs Fit
From the Atosa spec sheet. Pick one of these loads:
| What fits | Load |
|---|---|
| 1 half barrel | One keg size |
| 2 slim quarters plus 2 sixth barrels | Mixed load |
| 1 quarter barrel | One keg size |
| 4 sixth barrels | One keg size |
| 4 Corny kegs | One keg size |
| 4 "The Greg" kegs | One keg size |
Is the 23" MKC23GR Right for Your Bar?
The MKC23GR is 23" wide and holds 1 half barrel keg, or up to 4 sixth barrel kegs. It has one door and pours through 1 dual tap tower (2 taps). It suits small bars, restaurants adding one or two draft beers, and back bars with only about 2 feet of open space.
Need more kegs? See the 58" MKC58GR.
Built for Daily Commercial Use
- Stainless steel inside and out
- Heavy duty Embraco compressor with R290, a natural refrigerant
- Slide out compressor assembly for easy service
- Electronic temperature controller
- 1 dual tap tower (2 taps)
- Manifold and ball taps included
- Stainless steel drip tray
- Recessed door handle
- Interior light
- Magnetic door gasket
- Door lock standard
- (1) shelf
- Pre-installed 3.5" casters
Pick the Right Size
| Model | Width | Doors | Half barrels | Taps |
|---|---|---|---|---|
| MKC23GR (this model) | 23" | 1 | 1 | 2 |
| MKC58GR | 57-4/5" | 2 | 2 | 4 |
| MKC68GR | 68" | 2 | 3 | 4 |
| MKC90GR | 89-3/10" | 3 | 4 | 4 |
Shop all draft beer coolers or our bar refrigeration.
Buy the Atosa MKC23GR in Seattle
Encore Seattle sells the Atosa MKC23GR new, not used, with the full manufacturer warranty. If you are pricing a kegerator in Seattle, it ships with free freight to Seattle restaurants on orders over $500, and we offer 1-3 day delivery from 12 distribution centers. We deliver to kitchens in Queen Anne, Belltown, the International District and Columbia City, and to restaurants across the lower 48.
Compare more options in our Beverage collection, or call or text +1 (206) 419-5801 with questions.
Specifications
| Spec | Detail |
|---|---|
| Configuration | Direct draw keg cooler, one solid door |
| Keg capacity | 1 half barrel, or 4 sixth barrels (see keg table) |
| Taps | 1 dual tap tower (2 taps), manifold and ball taps included |
| Doors | 1 solid door with lock, recessed handle, magnetic gasket |
| Capacity | 7.1 cu. ft. |
| Shelves | (1) |
| Exterior dimensions | 23" W x 31-1/10" D x 39-1/4" H (cabinet) |
| Height with tap towers | Tap tower adds about 15-1/2" |
| Temperature range | 35°F to 38°F |
| Temperature control | Electronic |
| Compressor | 1/7 HP Embraco, slide out assembly |
| Refrigerant | R290 |
| Construction | Stainless steel interior and exterior |
| Drip tray | Stainless steel |
| Lighting | Interior light |
| Casters | 3.5", pre-installed |
| Electrical | 115V / 60Hz / 1-phase, 2.3 amps |
| Plug | NEMA 5-15P |
| Net weight | 132 lb |
| Shipping weight | 188 lb |
| Warranty | 3-year parts and labor, 5-year compressor |
| Certifications | cETLus, ETL-Sanitation |
Before You Order
- Plan for a standard 115V outlet with a NEMA 5-15 receptacle.
- Check your space: the cabinet is 23" wide, 31-1/10" deep and 39-1/4" tall. The tap tower adds about 15-1/2" on top, so plan for about 54-3/4" of height.
- With the door open, the unit needs about 53" of depth from the back of the cabinet.
- The MKC23GR has a rear lower skirt that reaches 3-3/4" down behind the casters. The casters cannot be removed or swapped on this model.
- The Atosa sheet does not list a CO2 tank or regulator, so plan to supply your own.
- Plan your kegs: it holds 1 half barrel keg, or up to 4 sixth barrel kegs. Check the keg table above for every load before you order kegs.
- Plan the delivery: the MKC23GR weighs 132 lb (188 lb shipping weight).
- Leave the unit some room to breathe and clean the condenser often, as Atosa advises.
Atosa MKC23GR FAQ
How many kegs fit in the Atosa MKC23GR?
The MKC23GR holds 1 half barrel keg. It can also hold 4 sixth barrel kegs or 4 Corny kegs. See the keg table above for every load.
How many taps does the MKC23GR have?
It has 1 dual tap tower (2 taps). The manifold and ball taps are included.
What size is the MKC23GR?
The cabinet is 23" wide, 31-1/10" deep and 39-1/4" tall, and the tap tower adds about 15-1/2". It weighs 132 lb (188 lb shipping weight).
What temperature does the MKC23GR hold?
It holds 35°F to 38°F with an electronic temperature controller, keeping 1 half barrel keg cold for the taps above.
Is the MKC23GR ENERGY STAR rated?
No. The MKC keg coolers are not ENERGY STAR rated.
Does the MKC23GR lock?
Yes. The door has a lock as standard on the MKC23GR, so the kegs stay secured after closing.
What power does the MKC23GR need?
The MKC23GR runs on 115V and draws 2.3 amps. Its standard NEMA 5-15P plug goes into a regular 115V outlet behind the bar.
How often should I clean the MKC23GR condenser?
Atosa says to clean the condenser frequently and to leave the unit some room to breathe. The compressor assembly slides out for easy service. The 132 lb MKC23GR rolls on casters when you need to pull it out.
What warranty comes with the MKC23GR?
3 years parts and labor and 5 years on the compressor.
Where can I buy the Atosa MKC23GR in Seattle?
Right here at Encore Seattle. The MKC23GR is new and ships to your restaurant with free freight on orders over $500.
How fast can I get the MKC23GR in Seattle?
We offer 1-3 day delivery from 12 distribution centers. Call or text +1 (206) 419-5801 to check timing for your address.